NICAM Stereo Recording and Playback

This DVD/VCR is capable of recording sound in Hi-Fi system. The recording will be performed automatically. NICAM STEREO broadcasts are recorded in its original sound system regardless of the setting. If you wish

Preparation:

Turn ON the TV and select the VCR channel on TV.

Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then press VCR to select the VCR mode. (The VCR indicator will light)

to record NICAM programmes, select NICAM "AUTO" as follows.

NICAM stereo sound reception:

1 Press SET UP MENU. Press

or to select VCR SETUP. Then press OK.

2 Press or to select NICAM. Then press / or OK to select [AUTO].

TIMER REC SET

AUTO REPEAT

[OFF]

VCR SETUP

CHANNEL SETUP

SYSTEM SETUP

SELECT :

ENTER : OK

EXIT : MENU

VCR SETUP

 

 

NICAM

[AUTO]

 

 

AUDIO MIX

[OFF]

PLAYBACK SHARPNESS

SELECT : /

ENTER : OK

EXIT : MENU

3 Press the SET UP MENU repeatedly until the TV picture appears.

NICAM programmes are divided into 4 types as shown below.

Note:

When listening to a stereo broadcast or playing back a tape Hi-Fi recorded in stereo, you have to connect the DVD/ VCR with the stereo audio system or the stereo TV. The sound which is output from the RF OUT jack is monaural.

NICAM STEREO broadcast "NICAM ST" illuminates when a NICAM STEREO broadcast signal is received.

NICAM MONO A broadcast "NICAM M1" illuminates when a NICAM MONO A broadcast signal is received.

NICAM MONO A B broadcast "NICAM M1/2" illuminates when a NICAM MONO A and MONO B broadcast signal is received.

NICAM OFF

It will be displayed for the NICAM signal when the "NICAM [OFF]" is selected in menu screen.

NICAM ST

NICAM M1

NICAM M1/2

NICAM OFF

32

Page 32
Image 32
JVC HR-XV1EK manual Nicam Stereo Recording and Playback, Nicam stereo sound reception, Nicam OFF