Duplicating a Video Tape
When you try to connect with a cable, make sure the power of both units have been turned off. Connect the recording unit with the TV. Therefore you can just watch what the recording unit is recording.
1 Load a blank cassette tape with the erase prevention tab intact into the recording DVD/VCR. Load the previously recorded cassette tape into the playback VCR or a video camera.
VCR
2 Use AUX or PR of the recording DVD/VCR to select the "A1", "A2" or "A3" instead of the preset channel.
A1 =
A2 = VCR/DECODER Scart Socket
A3 = Front AV jacks
3 While holding 2, press 
and then 4of Recording unit.
4 Press
5 Pressing. 4of both units simultaneously to start the Duplicat-
Note:
Before starting the duplicating process, select the proper
tape speed using 
. For a
Connection with second Video recorder or Video camera
OR
Playback unit
Recording unit |
(not supplied) |
Press AUX on the recording unit repeatedly until A3 appears.
Playback on camera
(not
supplied)
Duplicating a disc material onto a video tape
You can record disc material in DVD, Video CD, Audio CD, etc. onto a video tape with this DVD/VCR only.
If the DVD disc has a 
” will appear on the screen for approx. 4 seconds. See page 38 for more information about the DVD playback.
Preparation:
•Load a cassette tape with the erase prevention tab intact.
•Select the tape speed in the VCR mode. (see P.24)
•Load a disc you wish to duplicate.
1 Press DVD to select the DVD mode. (The DVD indi- cator will light)
2 Press 
to start the disc playback.
3 During disc playback, while holding 2, press 
.
Note:
You can set the duplicating time using the
35
