JVC HR-XV1EK manual Tuning the TV Stations Manually, CH4, CH5, Satellite, Numbered keys. Then

Tuning the TV Stations Manually

This VCR has one built-in tuner to receive broadcasts. Before you record a TV broadcast, you must set and preset all channels. This VCR can preset up to 80 channels.

Preparation

•Turn on the TV, and select the VCR channel on TV.

•Make sure TV/VCR/DVD switch has been slided to VCR/ DVD. Then press VCR to select the VCR mode. (The VCR indicator will light)

Example: Preset the BBC 2 on programme position 2.

1 Press SET UP MENU. Press ▲ or ▼ to select the CHANNEL SETUP. Then press OK.

	TIMER REC SET
	AUTO REPEAT		OFF
	VCR SETUP
	CHANNEL SETUP
	SYSTEM SETUP
SELECT :
ENTER		: OK
EXIT		: MENU

2 Press ▲ or ▼ to select the CH TUNING. Press OK to select CH TUNING screen.

CHANNEL SETUP

CH TUNING GUIDE CH SET

SELECT :

ENTER : OK

EXIT : MENU

CH 01	BBC 1
CH 02	BBC 2
CH 03	ITV
CH 04	CH4
CH 05	CH5
CH 06	SATELLITE

Note:

Occasionally, the auto search might catch a weak signal and stop. If the TV station signal is weak, you shouldn't store this station.

In that case restart the auto search using or .

3 Press	(falling frequency) or		(rising frequency)
once to start the search. It stops at each broadcast
automatically (" "
changes to "		"). Press
or	repeatedly until		CH 1

BBC 2 appears. Only in

case of receiving a weak
broadcast (drifting	SEARCH :
picture), does search fail
	EXIT	: MENU
to stop. If you want to
stop, press or .
Press OK to preset. The
search menu screen will				CH	1
disappear if the next
mode is not activated in
less than 50 seconds.
	CH	:	/ 0-9
	OK	: OK		EXIT : MENU
4 Press ▲ or ▼ repeatedly	SEARCH	:OK		CH	2
until 2 is displayed. (Or
enter 0 2 with the 1 to 0
numbered keys). Then				EXIT:MENU
press OK.
	OK

5 Repeat the steps 3 and 4 to preset other TV stations.

6 Press SET UP MENU repeatedly until the TV picture ap- pears on the screen.

16