EN 47•An error message "No devices detected
to connect. Power ON all devices in
system." appears . . .
...when a wrong port number is
selected.
...when the connection is wrong.
...when the device's ID number is
already in use.
...when the device's power is not
turned on.
Check the Serial Port selection, too.
To return to step 1, check the connection
and the device's power and try again.
•When all serial COM ports are
occupied by other applications the
error message "Error--This application
will close. Check devices--Confirm that
power is ON." appears. Free a serial
COM port to start up JLIP Player
Software.
4
SELECT DEVICE(S)Click on the name of the device you
wish to control. Clicking "OK" brings up
the MOVIE PLAYER window.
•It is possible to select a second device
of a different type simultaneously, but it
is impossible to select two same type
devices simultaneously.
Device Selection
Select device to control.
DISCONNECT
06:VCRCAMERA
VCR
VIDEO PRINTER
OK
CANCEL
DISCONNECT