Introduction

Name and Function of Parts

Camera unit

 

K

 

J

A

 

 

I

B

H

 

C

G

 

D

 

E

 

F

 

A Mounting hole  2

Use these when mounting the base to the ceiling, wall or electrical box.

(A Pg. 17)(A Pg. 21)

Note：

●To mount the camera using an electrical box, please check with your dealer or nearest JVC servicing center.

B Holes for connection cable and piping

This hole is for pulling out the connection cable. You can also use this hole to mount the camera directly on the piping. (Piping hole: G3/4- 14UNC)

(A Pg. 22)

CFall-prevention wire mounting screw

This is used to mount the fall-prevention wire to the camera. (The fall-prevention wire is not supplied.)

D Piping hole plug/Piping hole (side)

This is used to mount the camera directly on the piping from the side. A piping hole plug is attached to this hole by default. (A Pg. 23)

E Dome cover

The dome cover is fragile. Take care when handling it.

F Inner dome

Before mounting the camera, remove it and perform image angle setting.

(A Pg. 17)

G Dome cover fastening screw

These are fastening screws for the dome cover.

HBase

Mount the base to the ceiling, wall or electrical box before mounting the camera.

(A Pg. 17)(A Pg. 21)

Note：

●Connect the fall-prevention wire to prevent the camera from dropping.

10