Heater cable connection

LAN Cable Connection

Connect the camera to a hub or computer using a LAN cable.

When connecting to a hub

Make use of a straight cable.

When connecting to a computer

Make use of a Cross Over cable.

Wind the

waterproof tape

AC24 V power supply

Solder or

crimp

Insulation tape

Heater power cable (White, Gray)

Note：

●When installing a heater unit (sold separately: KA-ZH215) to this product, be sure to connect to AC 24 V.

●When installing a heater unit (sold separately: KA-ZH215), read the heater instruction manual carefully before installing.

●The AC 24 V power supply should conform to the following : Class 2 only (For USA), Isolated power supply only (For Europe).

●Please consult your nearest JVC dealer regarding heaters.

About heater cables

Maximum

40 m

120 m

180 m

extension

(130 ft)

(390 ft)

(590 ft)

 

 

 

 

Conductor

R1.0

R1.6

R2.0

Diameter

 

 

 

(mm)

 

 

 

 

 

 

 

10BASE-T/ 100BASE- TX(PoE) terminal

LAN cable

Note：

●Cross cables cannot be used with some computer models. When connecting VN- C215VP4U directly to a computer, make sure to check the computer’s LAN specifications in advance.

Memo：

●Sealed cables are recommended for outdoor use.

●Make use of a Category 5 (or higher) cable in the case of 100BASE-TX.

26