JVC VN-C215VP4U 1.Click [Start], 4.Set the IP address, The computer with which,
IP Address setting at the computer

Setting

IP Address Settings (continued)

IP Address setting at the computer

Set the computer to an IP address that enables communication with VN-C215VP4U.

1.Click [Start]

●Select in the order of [Control Panel]-[NetworkConnection]-[Local Area].

2.The computer with which Internet Explorer is launched automatically selects the connected network

●Right-click and select [Properties].

●Check to ensure that the [Client for Microsoft Networks] and [Internet Protocol(TCP/IP)] check boxes are selected.

3.Select [Internet Protocol(TCP/IP)] and click [Properties].4.Set the IP address

ASelect [Use the following IP adress].

B Set the [IP Address]. (For example, use 192.168.0.100 when VN-C215VP4Uis in its default settings)

Memo：

● Make sure that you take note of the original IP address before altering.

Note：

● When setting, ensure that a duplicate IP address is not used within the same network environment.

C Set [Subnet Mask] to a value that is appropriate for the setting operation. Clarify with the network administrator if you have any queries.

(Use 255.255.255.0 when the camera is in its default settings)

D When a [Default Gateway] is present, make use of the IP address (e.g., 192.168.0.254).

E Click [OK].

5.Click [OK] on the [Local Area Connection Properties] screen

34