S [MONITOR] Monitor terminal (RCA pin)

(A Pg. 28)

T Heater power connector

This power connector is used when the camera is installed with a heater (sold separately: KA- ZH215).

U Heater space

Memo：

●When mounting the heater (sold separately :KA-ZH215), read the instruction manual of the heater carefully before mounting.

V Camera unitWCamera Fastening Claw 2

This claw fastens the camera unit to the base. To remove the base, push it towards the direction of the arrow and remove. (A Pg. 17)

X [MAC address] MAC address indicator

The MAC address is a unique physical address of the product. This address cannot be altered.

Y Tilt fastening screw

After adjusting the field angle, tighten the screw so that the camera field angle will not be misaligned when using the camera in locations with vigorous vibrations. (A Pg. 28)

Z Imaging Direction mark

Install the camera facing the arrow in the shooting direction.

a Lug plate

This plate fastens the silica gel. (A Pg. 20)

b Silica gel insertion space

(A Pg. 20)

Lens section

SPOT

c

FOCUS ADJ

 

 

IRIS ADJ

 

 

FOR SERVICE

 

 

d

 

e

L

H

IRIS

 

f

LEVEL

 

 

 

c [FOCUS ADJ] Focus adjustment button

This is used to adjust the lens focus.

Press the button to open the lens iris for 30 seconds. The focus is now easier to adjust as the depth of field becomes shallow. (A Pg. 29)

Memo：

●Pressing the focus adjustment button automatically activates the electronic shutter. The screen may flicker but this is not a malfunction.

d [IRIS LEVEL] Iris level adjustment dial

This dial adjusts the iris level of the auto iris lens. Normally, adjustment is not required. Adjust if required, depending on the conditions of the object.

To darken: Anti-clockwise direction (towards L)

To brighten: Clockwise direction (towards H)

Memo：

●Adjust the iris level after [AGC] is set to AOffB. For AAGC function settingsB, please refer to the [INSTRUCTIONS](pdf) in the supplied CD- ROM.

●If AOffB is not set, turning the dial towards L will activate the AGC function. The camera sensitivity increases and the image quality becomes grainy.

e Focus adjustment ring

Move the ring to the left and right to adjust the focus. (A Pg. 29)

f Zoom adjustment ring

Move the ring to the left and right to adjust the field angle. (A Pg. 29)

13