Mounting the inner dome

After all settings are complete, mount the inner dome to the camera.

1.Mount the inner dome

Mount the inner dome to the claws (x3).

Claw

(3 locations)

Inner dome

Note：

●Mount the inner dome without covering the lens.

●When mounting the inner dome, make sure that the position of the lens is not shifted. Otherwise, the configured field angle will be distorted.

Mounting the dome cover

1.Clean the dome cover

Before mounting, remove and clean any dust or dirt on the dome cover.

Memo：

●Dirt on the dome cover may be reflected in the images.

Note：

●Do not pull or apply excessive force to the dome cover.

2.Mount the dome cover to the base

Align the base with the position alignment marks (x3) on the dome cover and mount the dome cover.

3.Secure the dome cover

Tighten the dome cover fastening screws (x3) with wrench (supplied) and secure.

38

Position alignment marks (3 locations)

3 2

Wrench (Supplied)

30