Setup

Mounting the camera (continued)

4.Insert the supplied silica gel

Take out the silica gel from its aluminum pack, insert it in the space for silica gel inside the camera and secure with a lug plate.

Space for inserting silica gel

Silica gel

Lug plate

Memo：

●Be sure to replace the silica gel when you reconnect or reinstall the camera during repair or maintenance.

●For replacement, please consult your nearby JVC’s dealer.

Use silica gel of service parts number LW40500-001Afor the parts to be replaced.

Note：

●Pay attention that rain does not seep into the camera when mounting it during rainy days.

●Be sure to use the supplied silica gel. Failure to do so may fog up the camera lens or dome cover.

●If the field angle is not adjusted immediately after mounting the camera, insert the silica gel after adjustment. The silica gel will lose its effect if it is exposed to air for a long time.

20