Mounting the camera

Fill up the piping hole and mounting hole with sealant, mount the camera to the base and insert silica gel.

1.Fill up the holes with sealant

Use sealant to fill up the mounting holes (x2) to which the piping hole and screws are mounted.

Sealant

Memo：

●Use GE silicon or other equivalent for the sealant.

Note：

●If the mounting holes (x2) are not completely sealed up with sealant, water or moisture may seep in and fog up the lens and dome cover. Seal up these holes completely.

2.Mount the camera to the base

Push in the two claws until you hear a click sound.

Note：

●Mount the camera such that the cables and fall-prevention wire of the dome cover are not caught in between.

3.Secure the camera with the camera fastening screws (x2).

Tighten the camera fastening screws (x2) with the screw driver and secure the camera.

2

Claw

(2 locations)

3

19