Setting Up the Internet Explorer (continued)

3.If ActiveX controls and plug-insof the Internet Explorer is not set to AEnableB, follow the steps below to enable it

●Click [Trusted sites] under [Tools]-[InternetOptions...]-[Security].Upon doing so, the [Sites...] button directly below becomes active. Click on this button and deselect the check for [Require server verification(https:) for all sites in this zone] in the displayed window. Next, add the IP address of VN-C215VP4U.If the setting is factory default, add the following web site to the zone.

http://192.168.0.2

●Click [Trusted sites] under [Tools]-[InternetOptions...]-[Security].Select the [Custom Level] button and open the [Security Settings] window. From the opened window, set all the items in [ActiveX controls and plug-ins]to [Enable].

4.If the pop-up block function of the Internet Explorer is enabled, follow the steps below to disable it

T The built-in viewer cannot be used when the pop-up block function is AEnableB.

●Selecting [Tools]-[Pop-upBlocker]-[Turn Off Pop-up Blocker] permits all sites.

●To allow only specific sites such as VN-C215VP4U,select [Tools]-[Pop-upBlocker]-[Turn On Pop-up Blocker], followed by selecting the active [Tools]-[Pop-upBlocker]-[Pop-up Blocker Settings], and open the [Pop-up Blocker Settings] window. In the opened window, add the address of VN-C215VP4Uas an allowed web site address.

5.When plug-in tools such as the Yahoo or Google toolbar are included in the Internet Explorer, disable the pop-up block function of these plug-in tools as well

41