The unit is to be powered by a DC 12 V power supply.
The unit is to be powered by a UL Listed DC12 V power supply. (For U type)
The 12 V DC power supply shall conform to the following: Class 2 only (For USA), Isolated power supply only (For Europe).
This installation should be made by a qualified service person and should conform to all local codes.
This installation shall be in accordance with the National Electrical Code, ANSI/NFPA 70.
Any Mention in this manual of Alarm inputs have not been evaluated by UL to be used for Burglar Alarm Functionality.
Special technique is required when installing this product. Please refer to your dealer for installation.
Rating label is pasted at the bottom of the camera.
JVC is not liable for any compensation if you drop the camera due to insecure mounting by not following the installation description. Pay careful attention during installation.
When mounting this product to a ceiling or wall, select a location strong enough to support the weight of this camera. If the location is not strong enough to support the weight, be sure to reinforce the ceiling or wall before installation.
The camera may drop if the mounting screws or pipings are not tightened securely. Check that the screws are tightened appropriately and securely.
Do not install the camera near lighting fixtures of high temperature, such as spot lights. It might result in failure or fires.
●Before starting an important recording, be sure to perform a test recording in order to confirm that a normal recording is possible.
●We do not accept liability for the loss of a recording in the case of it becoming impossible to record due to a problem in the video camera, VTR, hard disk recorder or video tape.
●Make sure you touch the metal surface of the [MONITOR] terminal to release the static electricity in your body before adjusting the camera shooting direction.
●The supplied
●To view file in pdf format, the installation of
AAdobe ReaderBon the Computer is required.
5