Karcher BDP 1500 Assembly, Before Startup, Inserting a filter bag, Attach the pad, Risk of damage

	Assembly
1	3 4	2	5
2
			6
			7

1Nut

2 Disc

3 Handle

4 Appliance base

5 Hexagonal screw

6 Female connector control line

7 Male connector control line

ÎUnpack the appliance.

ÎRemove the cable ties from the bottom end of the handle.

Note

Ensure that the toothed wheel does not fall out of the opening.

ÎHold the handle over the appliance base upright and with the cable hook to the back.

ÎInsert the bottom end of the handle be- tween the two tabs of the appliance base.

ÎAlign the borings.

ÎConnect the handle and the appliance base using the 3 enclosed screws, 6 washers and 3 nuts as shown in the illus- tration above.

ÎTighten the screws using the enclosed open end wrench.

ÎInsert the plug of the control line into the female connector of the control line.

Before Startup

Inserting a filter bag

ÎDisconnect the mains plug from the socket.

ÎPull the lever for level adjustment and bring the handle in a vertical position.

ÎTilt the appliance backward and store it on the handle.

1 2 3

1Filter bag

2 Cover

3 Connection neck, vacuum apron

ÎSlide the cover downward/to the rear and remove it.

ÎInsert the filter bag into the appliance and place over the connection neck of the vacuum apron.

ÎReplace cover.

Attach the pad

￿Caution

Risk of damage!

Do not store the appliance with inserted pad. Always remove the pad after every use.

ÎDisconnect the mains plug from the socket.

ÎPull the lever for level adjustment and bring the handle in a vertical position.

ÎTilt the appliance backward and store it on the handle.

14English