Kathrein UFS 702si, UFS 702sw manual Audio settings, Setting the volume, Muting, Digital output

Audio settings

Setting the volume

Set the required volume level using the % buttons on the remote control of the receiver. A bar indicator is displayed on the screen to show the set volume.

Muting

Press the  button to mute the sound. “Mute” is displayed.

Press the button again to restore the sound.

Digital output

The receiver has an audio output for AC3 format (Dolby Digital). This gives you the opportunity to bring cinema quality sound into your living room. Connect the digital audio output only to an appropriate system.

Always follow the

operating instructions

for your Dolby Digital

system.

Only a few programme providers broadcast the AC3 format. If no AC3 signal is received, you can only make the normal stereo or mono settings and choose the languages that are broadcast.

Digital/analogue – audio mode

In digital satellite technology the picture and sound are generally transmitted in digital format (MPEG-coded). Where the term “Analogue audio mode” is used in this section, it signifies that the digital signals are converted in the unit into audio signals and made available at the “Left” and “Right” cinch sockets and at the TV and VCR Scart sockets in analogue format.

By contrast, in “Digital audio mode” the signals are transmitted in digital format via the “Digital” cinch socket to corresponding terminal devices, such as a Dolby Surround system, for decoding. Two-channel stereo signals (encoded

53