Preface
Dear customer,
This operating manual is intended to help you make the fullest use of the extensive range of functions offered by your new satellite receiver.
We have tried to make the operating instructions as easy as possible to understand, and to keep them as concise as possible. To help you understand particular specialist terms that cannot be translated, we have added a short glossary at the end of the manual.
The power switch is an environmentally friendly feature. If you will not be using your receiver for a longer period, you should use the power switch to disconnect it from the power supply and save energy. For shorter breaks, you can switch the receiver to standby on the remote control, which uses only a minimal amount of energy.
We wish you good reception and much pleasure using your new DVB satellite receiver.
Yours,
The KATHREIN team
Important Information
The channels available on the satellites and transponders are subject to continual change. If changes do occur, the new channels have to be set in the receiver because the factory preset programming corresponds to the status on the date of manufacture. The information for these settings can be found on the Internet or in relevant magazines.
Your receiver is factory fitted with the latest software version. We are, however, constantly working on adapting the software to the wishes of our customers and to developments in technology. The “Software and Channel List Update” section contains additional information.
Please keep the original packaging in case you need to return the product at any time!
Make a note of the receiver’s basic settings, so as to be able to restore them if necessary!
DiSEqC™ is a trademark of Eutelsat.
UFO®micro and UFO®mini are registered trademarks of
2
