Connection and set-up
TV and Video recorder connection
Connect the satellite receiver (TV Scart socket) and the TV set using a Scart cable (see “Connection example”).
If your TV has a stereo feature, you can receive the sound in stereo via the Scart connection.
Also connect the satellite receiver (VCR/AUX Scart socket) and the video recorder/PVR using a Scart cable.
If you are recording using an external video recorder, remember not to operate the receiver during recording, otherwise all the
Audio connection
If you want to play the sound on your
Dolby connection
The Dolby Digital output (electrical/optical) is intended for connection to a Dolby Digital system (see “Connection example”).
Inserting batteries into the remote control
Remove the cover on the rear of the remote control. Insert the two supplied batteries into the remote control. Ensure correct polarity of the batteries; the + and – markings are indicated inside the battery compartment.
Slide the cover back into the housing until it locks in place.
Used batteries are special waste!
Do not throw spent batteries into your domestic waste; take them to a collection point for old batteries!
Electronic equipment is not domestic waste - in accordance with directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL dated 27th January 2003 on used electrical and electronic appliances, it must be disposed of properly.
Please take this unit to a public collection point intended for this type of disposal at the end of its useful life.
11
