Receiver to receiver data transfer
Your receiver is able to receive data from another receiver via its RJ11 port. For this, the two receivers are connected with a null modem cable. The transmitting receiver is the “master”, and the receiving receiver is the “slave”.
Only possible between two UFS 702 receivers!!!!
Preparation
The master and slave are both switched on. Then the RJ 11 ports of the two receivers are interconnected by a
Channel list download
Master:
•Press the buttons simultaneously on the “master” unit
•Press the button to transfer the TV/Radio lists
Slave:
Do not switch the receiver off while data is being saved – the red LED comes on (Flash IC (memory) can be damaged)!
First “Storing” then a progress bar is displayed!
Download operating system
Master:
•Press the buttons simultaneously on the master unit
•Press the button to transfer the operating system
Slave:
Do not switch the receiver off while data is being saved – the red LED comes on (Flash IC (memory) can be damaged)!
First “Storing” then a progress bar is displayed!
57
