Kathrein UFS 702si, UFS 702sw manual DiSEqCTM Digital Satellite Equipment Control

Installation

DiSEqCTM (Digital Satellite Equipment Control)

Path: MENU>Main menu>Installation>DiSEqC

On the DiSEqCTM menu the control signals must be set according to the needs of your satellite system.

22 kHz signal	22 kHz inactive
{OFF}
{High/Low}	22 kHz switches between High and
	Low band
{Pos. A/B}	22 kHz switches between two
Tone burst	satellites
{High/Low}	Activates tone burst depending on
	the reception frequency
{Pos. A/B}	Selects orbit position 1/3 or 2/4
{Opt. A/B}	Switches between orbit position 1/2
	or 3/4
DiSEqC™	Select {ON} if you want to operate
{OFF}, {ON}
	the receiver on a DiSEqC™ suitable
	satellite reception system.
DiSEqC™ repeat	(used for cascaded switching
	matrices)
{OFF}	No repeat of DiSEqCTM signal
{ 1 }	The DiSEqCTM signal is repeated once
{ 2 }	The DiSEqCTM signal is repeated
	twice

45