Kathrein UFS 702si, UFS 702sw manual Important note on setting up receiver on a UFOmicro system

Important note on setting up receiver on a UFO®micro system

When registering the receiver to a UFO®micro single-cable matrix EXU 544, you must do the following:

-Connect the receiver to the TV set, but do not yet connect it to the ESU 32 antenna socket.

-Perform a UFO®micro reset on the receiver as described below.

1.Press the  button to switch to the main menu.

2.Press the  buttons to get to the installation menu and confirm your entry by pressing .

3.Press the  buttons to get to the DiSEqC™ menu and confirm your entry by pressing .

4.Press the  buttons to select the “UFO” option.

5.In the UFO menu press the  buttons to select “UFO®micro”.

6.Press  and change the selection to RESET with the  buttons, then confirm your entry by pressing .

7.Press  to exit the UFO menu (press  to confirm the changes).

8.Press  three times to get back to the starting point.

-Press the  button to switch the receiver to standby mode.

-Now you can connect the receiver to the antenna socket.

-Press the  button to switch the receiver on.

-The registration is then performed automatically – the screen briefly shows: “UFO® micro active”.

9