Installation
a)Start the software download from the “INSTALLATION” menu after selecting the “Download” menu (6) by
pressing the button. The download then runs through a number of phases, with each phase accompanied by relevant information messages. You can abort the various phases at any time.
b)Search for the download channel on the ASTRA satellite. This search is performed the first time the unit is operated and may take a few minutes. When the unit is restarted the saved download channel is set directly.
c)Load the receiver identifier. This operation may also take several minutes.
d)You can select data from the data carousel, depending on availability (operating system/channel lists).
e)After choosing option 1 “Receiver software”, the following menu is displayed:
CAUTION!
Download software version: VX.X
Download software version: VX.X
Continue?
OK = YES | EX = NO |
f)Press the button to perform a version check. If there is an older version on the data carousel, a message appears telling you so. You can abort the download prematurely if necessary.
This information is determined by the CAM, or the Smartcard and does not originate from the receiver. Note: Depending on the load on the data carousel, the load operation may take as long as an hour!
g)Save the downloaded data.
You must not switch the unit off during this phase!
50
