Kathrein UFS 702sw, UFS 702si Various display time, RC, LCD, download, factory reset, Xxxx, Reset

Installation

UFO®

“UFO®mini” and “UFO®micro” are satellite systems specific to Kathrein. Please refer to the relevant operating manuals for the necessary setting parameters.

UFO®mini	{OFF}/{ON}
(2)	Remote Freq.	{XXXX}
(3)	UFO®micro	{ O F F } / { O N } /
		{RESET}

Press the  button to access the main menu. Activate the desired sub-menus using the specified number buttons

-[X] or with the programme buttons /. The selected sub-menu is framed in colour and the associated help

text is displayed. Then press the  button to access the activated sub-menu. Branch into the additional sub-menus in the same way.

The changes you make are only applied if you press the

button in response to the “Save changes?” prompt

after you have exited the menu by pressing the  button. When you exit DiSEqCTM/UFO®micro settings, an additional message appears confirming activation of UFO®micro.

Various (display time, RC, LCD, download, factory reset)

Path: MENU>Main menu>Installation>Various

Display time

1...9 The banner display time (programme status information) can be set from 1 to 9 seconds.

 function

As an alternative, signal quality can be assigned to the  button.

Banner Displays programme status information! (can be immediately switched back off by pressing the button again)

Signal quality Displays the “Channel parameters and signal” menu. This functions facilitates optimal antenna alignment.

46