Kathrein UFS 702si, UFS 702sw manual Picture format, Digital audio, AC-3, VCR signals

Installation

Picture format
	4:3	If 4:3 is set, all programmes are displayed in the
		regular 4:3 format.
	16:9 When 16:9 is set, all programmes broadcast in
		widescreen format, and flagged appropriately, are
		automatically switched to 16:9 format.
		However, this function only operates if your TV set
		can process and display 16:9 format pictures (6 volt
		switching voltage).
Digital audio	Two modes are available for the digital output of your
	receiver:
	Standard The signal at the digital output is encoded in
		PCM format (“PCM”)
	AC 3	If you have a Dolby Digital system, you can
		select AC3/Dolby Digital mode.
		If your receiver receives a Dolby Digital
		encoded audio signal, the digital output is
		automatically switched to Dolby Digital format
		(AC-3).
Note:	In both modes, press button A at any time to display the
	“Digital/analogue audio mode” menu to check the current
	format of the digital output signal or make a different
	selection, if necessary.

VCR signals

TV > VCR (video return path)

ON When ON is selected, the video and audio signals from the TV socket are still transmitted to the VCR socket even in standby mode.

OFF Slightly less power is used in standby mode in the OFF position.

VCR signal (input signal at VCR Scart socket)

CBVS/RGB Use the CBVS/RGB setting when connecting a VHS video recorder or a DVD player/recorder.

YCUse the YC setting when connecting an S-VHS video recorder (S-Video).

43