Kenmore KFPSL4 Egg Whip Professional Model KFPM650 Only, To Assemble Egg Whip, To Disassemble

Models: KFPM650 KFPSB KFPJU KFPDS6 KFP6EW KFPJE KFPCJ KFPPS KFPSH6 KFPFF KFPSL4 KFPSL6

1 80
Download 80 pages 15.96 Kb
Page 13
Image 13
Egg Whip (Professional Model KFPM650 Only)

Egg Whip (Professional Model KFPM650 Only)

The Egg Whip is designed to whip egg whites or heavy cream for use as toppings or meringues. For best results, at least 1 cup of heavy cream or 3 egg whites should be whipped at a time. Whipping smaller quantities may not result in maximum volume.

To Assemble Egg Whip:

1.Place Egg Whip stem on motor base shaft.

2.Fit the whip paddle on the stem and push down to engage the ridges of the stem with the gears of the paddle.

3.Fit cap over stem and push down to lock in place.

4.Place the work bowl cover on the work bowl with the feed tube just to the left of the handle. Be sure the center pin on whip fits into center opening of cover. Grasp the feed tube and turn to the right to engage the interlock. The Egg Whip is now ready to operate.

5.Press ON control pad and whip product to desired texture and volume.

To Disassemble:

1.Unplug power base from electrical outlet. Remove work bowl cover by turning to the left.

2.Lift whip assembly straight up and off. Remove whipped product from work bowl.

3.Remove cap from whip assembly by pulling straight up. Push down on stem pin to remove stem from whip paddle.

11

Page 13
Image 13
Kenmore KFPSL4, KFPSL6, KFPFF, KFPSH6, KFPPS Egg Whip Professional Model KFPM650 Only, To Assemble Egg Whip, To Disassemble