*(AM–), or +(¢) on the remote controller.4Make a call.■Press the volume knob.

■Press OK on the remote controller. ■ You can input max 25 (KDC-BT648U/

KDC-X695) / 32 (KDC-X395/ KDC-348U) digits.

Speed Dialing (Preset Dial)2Press number button (1 – 6).3Press the volume knob to make a call.Registering to the Preset Dial Number (Preset Memory)2Enter the phone number with reference to the following:

Dial a number/ Calling a number in the call log/ Calling a number in the Phone Book

3Press and hold number button (1 – 6) for about 2 seconds.Make a Voice Dialing Call2Turn the volume knob to select “VOICE RECOG”, then press to enter.“V-RECG READY” is displayed.3Press the volume knob to start voice recognize.4“PB NAME” is displayed.When a beep is heard, say the name within 2 seconds.5“PN TYPE” is displayed.When a beep is heard, say the category name within 2 seconds.The recognized phone number (name) is displayed.6Press the volume knob to make a call.

■This step is the same as step 4 of the procedure in <Calling a Number in the Phone Book> (page 16). You can make a

call or select a category.

■If your voice cannot be recognized, a message is displayed. Pressing the Volume knob allows you to retry voice input. Refer to <Troubleshooting> (page 34).

■Both the name and category require registration of a voice tag. Refer to <Setting a Voice Command> (page 20).

■Audio sound is not output during voice recognition.Receiving a CallAnswering a Phone Call

KDC-BT648U /KDC-X695

Press .

KDC-X395 /KDC-348U

Press the volume knob.

Rejecting an Incoming CallPress SRC.During a CallDisconnecting a Call

KDC-BT648U /KDC-X695

Press .

KDC-X395 /KDC-348U

Press SRC.

Switching to the Private Mode

Press number button 6 to switches between Private talk (“PRIVATE TALK”) and Hands-free talk (“HANDS FREE”).

Call WaitingAnswering Another Incoming Call with the Current Call SuspendedTurn the volume knob to select [ANSWER], then press to enter.Continuing the Current CallTurn the volume knob to select [REJECT], then press to enter.Switching between the Current Call and Waiting CallPress the volume knob to switches the calling party.Downloading the Phone BookTo download automatically

If the cell-phone supports a phone book synchronization function, the phone book is downloaded automatically after Bluetooth connection.

■Setting on the cell-phone may be required.

■If no phone book data is found in the unit even after the compete display, your cell-phone may not support automatic

Continued to next page

English 17