Kenwood KDC-348U, KDC-BT648U, KDC-X395, KDC-X695 Function settings, LPF, FADER, 5 Hold, BALANCE, SYSTEM Q, HPF REAR, MID LEVEL, TRE LEVEL, MID LEVEL, TRE LEVEL, HPF FRONT, SUB-WLEVEL, BASS BOOST, BASS LEVEL

Function settings

1Press SRC to select a source other than “STANDBY”.

2Press the volume knob to enter [FUNCTION] mode.

3Turn the volume knob to select [AUDIO CONTROL] or [SETTINGS], then press to enter.

4Turn the volume knob to make a selection, then press to confirm.

■See table below for selection.

■Repeat step 3 until the desired item is selected/activated.

■Press to return to the previous item.

5 Hold to finish the procedure.

[AUDIO CONTROL] : While listening to any source except in STANDBY state or Bluetooth mode.

	Item	Selectable setting (Preset: *)
SUB-W LEVEL		–15 — 0 * — +15: Adjusts the subwoofer output level.
BASS BOOST		B.BOOST LV1 */ B.BOOST LV2: Selects your preferred bass boost level. ; OFF: Cancels.
SYSTEM Q		NATURAL */ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ GAME: Selects a preset sound mode suitable to the
		music genre. (Selects [USER] to use the customized bass, middle, and treble settings.)
BASS ADJUST		KDC-X695/ KDC-X395 only:
	BASS CTR FRQ	40/ 50/ 60/ 70/ 80/ 100 */ 120/ 150: Selects the center frequency.
	BASS LEVEL	–8 — 0 * — +8: Adjusts the level.
	BASS Q FACTOR	1.00 */ 1.25/ 1.50/ 2.00: Adjusts the quality factor.
	BASS EXTEND	ON: Turns on the extended bass. ; OFF *: Cancels.
MID ADJUST		KDC-X695/ KDC-X395 only:
	MID CTR FRQ	0.5K/ 1.0K/ 1.5K/ 2.0K *: Selects the center frequency.
	MID LEVEL	–8 — 0 * — +8: Adjusts the level.
	MID Q FACTOR	1.00 */ 2.00: Adjusts the quality factor.
TRE ADJUST		KDC-X695/ KDC-X395 only:
	TRE CTR FRQ	10.0K/ 12.5K */ 15.0K/ 17.5K: Selects the center frequency.
	TRE LEVEL	–8 — 0 * — +8: Adjusts the level.
BASS LEVEL		KDC-BT648U/ KDC-348U only:
MID LEVEL		–8 — 0 * — +8: Source tone memory: Adjusts the level to memorize in each source. (Before making an
TRE LEVEL		adjustment, select the source you want to adjust.)
BALANCE		L15 — 0 * — R15: Adjusts the left and right speaker output balance.
FADER		R15 — 0 * — F15: Adjusts the rear and front speaker output balance.
SUBWOOFER SET		ON *: Turns on the subwoofer output. ; OFF: Cancels.
DETAILED SET
	HPF FRONT	THROUGH *: All signals are sent to the front speaker. ; 40/60/80/100/ 120/150/180/220 (HZ): Frequencies
		lower than the specified value are cut off. (Underlined: KDC-X695/ KDC-X395 only)
	HPF REAR	THROUGH *: All signals are sent to the rear speaker. ; 40/60/80/100/ 120/150/180/220 (HZ): Frequencies
		lower than the specified value are cut off. (Underlined: KDC-X695/ KDC-X395 only)
	LPF	THROUGH *: All signals are sent to the subwoofer. ; 50/60/80/100/120 (HZ): Frequencies higher than the
	SUBWOOFER	specified value are cut off. (Underlined: KDC-X695/ KDC-X395 only)

28 English