Kenwood KDC-348U, KDC-BT648U, KDC-X395, KDC-X695 Wiring connection

Antenna Cord

Wiring connection

USB connector

AUX input (Stereo)

Use the mini-plug (3.5 mm; 1/8”) cable which is stereo type and does not have

any resistance.

FM/AM antenna input (JASO)

		R	L	Rear output
				Front output
Fuse (10A)				Sub Woofer output
Wiring harness D					Microphone H
					(KDC-X695 only)
White	To front left speaker			To Kenwood disc changer/
White/Black				External optional accessory
Gray	To front right speaker			(To connect these leads, refer
				to the relevant instruction
Gray/Black
				manuals.)
Green	To rear left speaker
Green/Black
Purple	To rear right speaker
Purple/Black
If no connections are made, do not let the wire come out from the tab.
Blue/White		Connect either to the power control terminal when
(Power control/ Antenna	P.CONT
		using the optional power amplifier, or to the antenna
control wire)		control terminal in the vehicle.
Brown		To connect the Kenwood navigation system, consult
(Mute control wire)	MUTE	your navigation manual.
		(Connect to the terminal that is grounded when
		either the telephone rings or during conversation.
		KDC-X395/ KDC-348U only)
Light Blue/Yellow		To use the steering wheel remote control feature, you
(Steering remote control	REMOTE CONT
		need to an exclusive remote adapter (not supplied)
	STEERING WHEEL
wire)
		matches your car is required.
	REMOTE INPUT
Blue		(Not used)
	ANT. CONT
		Car fuse box		Ignition key switch
Red (Ignition wire)		ACC
Yellow (Battery wire)					Car fuse box
Black (Ground wire)					(Main fuse)
To the metallic body or chassis of the car				–	+ Battery

32 English