to finish the procedure.

Getting Started

Canceling the display demonstrationThe display demonstration is always turned on unless you cancel it.When you turn on the power (or after you reset the unit), the display shows:[CANCEL DEMO] \ [PRESS] \ [VOLUMEKNOB]1Press the volume knob.[YES] is selected as the initial setup.2Press the volume knob again to confirm.[DEMO OFF] appears.

■If no operation is done for about 15 seconds or if you turn the volume knob to select [NO] in step 2, [DEMO MODE] appears and the display demonstration starts.

Setting the demonstration mode
Adjusting the clock1Press the volume knob to enter [FUNCTION] mode.2Turn the volume knob to select [SETTINGS], then press to enter.3Turn the volume knob to select [CLOCK], then press to enter.4Turn the volume knob to select [CLOCK ADJUST], then press to enter.Clock hour flashes on the display.

5Turn the volume knob to adjust the hour, then press to enter minute adjustment. Clock minutes flashes on the display.

6Turn the volume knob to adjust the minute, then press to confirm.Press 4 / ¢ to move between the hour and minute adjustment.
7 Holdto finish the procedure.
1Press the volume knob to enter [FUNCTION].2Turn the volume knob to select [DEMO MODE], then press to enter.3Turn the volume knob to select [ON] or [OFF].

If [ON] is selected, display demonstration starts if no operation is done for about 20 seconds.

4 Hold
Initial settings before operations1Press SRC to enter [STANDBY] mode.2Press the volume knob to enter [FUNCTION] mode.3Turn the volume knob to select [INITIAL SET], then press to enter.

4Turn the volume knob to make a selection, then press to confirm. See table below for selection.

5 Hold

to finish the procedure.

ItemSelectable setting (Preset: *)

PRESET TYPE

NORMAL *: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ AM). ;

 

MIX: Memorizes one station for each preset button regardless of the selected band (FM1/ FM2/ FM3/ AM) and

 

another Satellite Radio Tuner.
KEY BEEPON */ OFF: Activates/deactivates the keypress tone.

BUILT-IN AUX

ON1 *: Outputs sound of the connected external component through the car speakers when “AUX” is selected as the

 

source. ; ON2: Outputs sound from the connected external component when “AUX” is selected as the source. When

 

you turn on the power, the sound attenuates (to prevent noise when no external component is connected). Turn the

 

volume knob clockwise to return to the previous volume level. ; OFF: Disables “AUX” in source selection.

CD READ

1*: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to play as a music CD. No sound can

 

be heard if an audio file disc is played.

SP SELECT

OFF */ 5/4/ 6 × 9/6/ OEM: Selects the speaker size for optimum performance.

F/W UP xx.xx

YES: Starts upgrading the firmware. ; NO *: Cancels (upgrading is not activated).

 

For details on how to update the firmware, see: www.kenwood.com/cs/ce/

English 5