■To select “PB NAME CHK”, play the registered voice.

■To select “PB NAME DEL”, delete a voice tag. Turn the volume knob to select “YES”, then press to confirm.

7“ENTER 1” is displayed. When a beep is heard, say a voice tag within 2 seconds.

8“ENTER 2” is displayed. When a beep is heard, say the same voice tag as that you said in step 7 within 2 seconds. “COMPLETE” is displayed.

9Press the volume knob to return to step 5.■ To exit Setting mode, press .

■To exit Bluetooth mode, press SRC.

■You can register up to 35 voice tags.■Audio sound is not output during voice tag registration.Registering Phone Book Name Type

1KDC-BT648U /KDC-X695

Press to enter Bluetooth mode. KDC-X395 /KDC-348U

Press and hold the volume knob to enter Bluetooth mode.

2Turn the volume knob to select [SETTINGS], then press to enter.

3Turn the volume knob to select [VOICE TAG], then press to enter.

4Turn the volume knob to select [PN TYPE EDIT], then press to enter.

5Turn the volume knob to select [GENERAL], [HOME], [OFFICE], [MOBILE], or [OTHER], then press to enter.

6Turn the volume knob to select [PN TYPE REG], then press to enter.
■To select “PN TYPE CHK”, play the registered voice. (KDC-X395/ KDC-348U only)

■To select “PN TYPE DEL”, delete a voice tag. Turn the volume knob to select “YES”, then press to confirm. (KDC-X395/ KDC-348U only)

7“ENTER 1” is displayed. When a beep is heard, say a voice tag within 2 seconds.

8“ENTER 2” is displayed. When a beep is heard, say the same voice tag as that you said in step 7 within 2 seconds. “COMPLETE” is displayed.

9Press the volume knob to return to step 5.

■Set the voice tag for all the 5 categories. If the voice tag is not registered for all the categories, the Phone book may not be recalled by voice command.

Bluetooth Setup

1KDC-BT648U /KDC-X695

Press to enter Bluetooth mode. KDC-X395 /KDC-348U

Press and hold the volume knob to enter Bluetooth mode.

2Turn the volume knob to select [SETTINGS], then press to enter.

3Turn the volume knob to make a selection, then press to confirm.■See table below for selection.■Repeat step 3 until the desired item is selected/activated.
■ Pressto return to the previous item.

4 Hold

to finish the procedure.

■ To exit Bluetooth mode, press SRC.

Item

Selectable setting (Preset: *)
PAIRING

DEVICE SEARCH Registers a Bluetooth device (pairing). (For details, see page 19.)

PHONE SELECT Selects a cell-phone connection. (For details, see page 20.)

AUDIO SELECT KDC-X395/ KDC-348U only:Selects a Bluetooth audio player connection. (For details, see page 20.)S-DVC SELECT (For details, see page 19.)

Continued to next page

English 21