Item

Selectable setting (Preset: *)

 

DEVICE DELETE

Cancel registration of the Bluetooth device.

 

 

1. Turn the volume knob to select the Bluetooth device, then press to confirm.

 

 

2. Turn the volume knob to select “YES”, then press to confirm.

SMS DOWNLOAD

Download a short message. (For details, see page 23.)
VOICE TAG

 

 

PB NAME EDIT

Registers voice for voice recognition and voice to select the Phone number category in Phone book.

 

PN TYPE EDIT

(For details, see page 20.)
DETAILED SET

 

 

PIN CODE EDIT

Specify the PIN code required when registering this unit using the Bluetooth device. By default, “0000” is

 

 

specified.

 

 

1. Turn the volume knob to select the number.

 

 

■ To move to the next digit, press ¢.

 

 

■ To delete the last digit, press 4.

 

 

2. Press the volume knob to register a PIN code

 

AUTO ANSWER

OFF: Does not answer the phone call automatically. ; 0: Automatically answers the phone call at once. ;

 

 

1 – 8 * –99: Automatically answers the phone call after lapse of 1 – 99 seconds.

 

RECONNECT

KDC-BT648U/ KDC-X695 only

 

 

ON *: Automatically reconnects the selected Bluetooth device when radio wave becomes strong enough,

 

 

even after it is disconnected. ; OFF: Cancels.

 

 

■ When this function is turned ON, the Bluetooth device is reconnected if it has been disconnected by

 

 

selecting [PHONE SELECT].

 

BT HF /

FRONT *: Outputs audio from the front-left and front-right speakers. ; ALL: Outputs audio from the all

 

BT HF/AUDIO

speakers.

 

CALL BEEP

ON *: You can output a beep from the speaker when a call comes in. ; OFF: Cancels.

 

BT F/W UPDATE

Display the firmware version and update the firmware.

 

MIC GAIN

–3 — 0 * — +3: Adjust the sensitivity of the built-in microphone for a telephone call. Adjust the voice of

 

 

caller. Setting to “+” increases the voice volume.

 

NR LEVEL

–3 — 0 * — +3: Reduce the noises generated by surrounding environment without changing the

 

 

built-in microphone volume. Adjust the voice of caller when it is not clear. Setting to “+” increases the noise

 

 

reduction.

 

EC LEVEL

–2 — 0 * — +2: Adjust the level of echo cancellation. Setting to “+” increases the echo cancel reduction.

 

MIC SELECT

Determines whether the built-in or external microphone is to be used when the receiver incorporates a

 

 

microphone. IN *: Use the built-in microphone. ; EXT: Use the external microphone.

■[MIC GAIN], [NR LEVEL], [EC LEVEL] is selectable only for KDC-BT648U, KDC-X695 and KDC-X395/KDC-348U with KCA-BT300.

About the Cell-Phone■Version: Bluetooth Standard Ver. 2.0■Profile:HFP (Hands Free Profile) OPP (Object Push Profile)PBAP (Phone book Access Profile) SYNC (Synchronization Profile)For the cell-phones verified for compatibility, access the following URL:
www.kenwood.com/cs/ce/bt/

■The units supporting the Bluetooth function have been certified for conformity with the Bluetooth Standard following the procedure prescribed by Bluetooth SIG. However, it may be impossible for such units to communicate with your cell-phone depending on its type.

22 English