Kenwood KDC-348U, KDC-BT648U, KDC-X395, KDC-X695 Troubleshooting, Symptom, be done, recording), 34 English, connections, Remedy/Cause, “IN” flashes, disc instead, service center, Reset the unit

Installation the Microphone Unit (KDC-X695 only)

1Check the installation position of the microphone H.2Remove oil and other dirt from the installation surface.3Install the microphone.

4Wire the microphone cable up to the hands-free box with it secured at several positions using tape or the like.

■Install the microphone as far away as possible from the cell-phone. Peel the release coatedpaper of double-face adhesive tape to fix on the place shown above.

H

Fix a cable with a commercial item of tape.Adjust the direction of the microphone to the driver.

Troubleshooting

Symptom	Remedy/Cause
Sound cannot be heard.	Adjust the volume to the optimum level. / Check the cords and connections.
“PROTECT” appears and no operations can	Check to be sure the terminals of the speaker leads are covered with insulating tape
be done.	properly, then reset the unit. If “PROTECT” does not disappear, consult your nearest
	service center.
The unit does not work at all.	Reset the unit.
Radio reception is poor. / Static noise while	Connect the antenna firmly. / Pull the antenna out all the way.
listening to the radio.
“IN” flashes.	The CD player is not operating properly. Reinsert the disc properly. If the condition did
	not improve, turn off the unit and consult your nearest service center.
CD-R/CD-RW cannot be played back and	Insert a finalized CD-R/CD-RW (finalize with the component which you used for
tracks cannot be skipped.	recording).
Disc sound is sometimes interrupted.	Stop playback while driving on rough roads. / Change the disc. / Check the cords and
	connections.
“NA FILE” appears.	The unit is playing an unsupported audio file.
“NO DISC” appears.	Insert a playable disc into the loading slot.
“TOC ERROR” appears.	The CD is quite dirty. / The CD is upside-down. / The CD is scratched a lot. Try another
	disc instead.
“ERROR 77” or “ERROR 99” appears.	The unit is malfunctioning for some reason. Press the reset button on the unit. If the
	“ERROR 77”/ “ERROR 99” code does not disappear, consult your nearest service center.

34 English