7“PAIRING” is displayed (KDC-X395/ KDC-348U with KCA-BT300 only)If “PAIRING OK” is displayed, proceed to step 10.If “PIN CODE NG” is displayed, proceed to steps 8.8Input the PIN code■Turn the volume knob to select the number.

■To move to the next digit, press ¢.

■To delete the last digit, press 4.

9Press the volume knob to transmit the PIN code.

If “PAIRING OK” is displayed, registration is completed. If the error message appears even though the PIN code is correct, try

Registering Special Bluetooth device.
10 Hold

to finish the procedure.

■To exit Bluetooth mode, press SRC.

■If there are 5 or more Bluetooth devices registered, you cannot register a new Bluetooth device.

Registering Special Bluetooth device

1KDC-BT648U /KDC-X695

Press to enter Bluetooth mode. KDC-X395 /KDC-348U

Press and hold the volume knob to enter Bluetooth mode.

2Turn the volume knob to select [SETTINGS], then press to enter.

3Turn the volume knob to select [PAIRING], then press to enter.

4Turn the volume knob to select [S-DVC SELECT], then press to enter.5Turn the volume knob to select a device name, press to confirm.

6Go through the procedure step 4 of <Registering from this unit> and complete the registration (pairing).

■If the device name is not in the list, select “OTHER PHONE”.Selecting the Bluetooth Device

1KDC-BT648U /KDC-X695

Press to enter Bluetooth mode.

KDC-X395 /KDC-348U

Press and hold the volume knob to enter20 English
Bluetooth mode.

2Turn the volume knob to select [SETTINGS], then press to enter.

3Turn the volume knob to select [PAIRING], then press to enter.

4Turn the volume knob to select [PHONE SELECT] or [AUDIO SELECT], then press to enter.

5Turn the volume knob to select a Bluetooth device name.6Press the volume knob to set up the Bluetooth device.■“✱(Device name)”: The selected Bluetooth device is busy.■“-(Device name)”: The selected Bluetooth device is on standby.■“ (Device name)“: The Bluetooth device is deselected.

■If a cell-phone is already selected, deselect it, and then select a different one.

7 Hold

to finish the procedure.

■To exit Bluetooth mode, press SRC.

Setting a Voice CommandRegistering Phone Book Name

1KDC-BT648U /KDC-X695

Press to enter Bluetooth mode. KDC-X395 /KDC-348U

Press and hold the volume knob to enter Bluetooth mode.

2Turn the volume knob to select [SETTINGS], then press to enter.

3Turn the volume knob to select [VOICE TAG], then press to enter.4Turn the volume knob to select [PB NAME EDIT], then press to enter.5Search for the Phone Book name to register

Select the name to register with reference to 5 in <Calling a Number in the Phone Book> (page 16).

If a voice tag has already been registered for a name, “*” is displayed before the name.

6Turn the volume knob to select [PB NAME REG], then press to enter.