Symptom

Remedy/Cause

“COPY PRO” appears.A copy-protected file is played.
“READ ERROR” appears.

Copy the files and folders for the USB device again. If the error message is still

 

displayed, initialize the USB device or use other USB devices.
“NO DEVICE” appears.

No USB device is connected. Connect a USB device, and change the source to USB

 

again.

“NO MUSIC” or “ERROR 15” appears.

The connected USB device contains no playable audio file. / Media was played that

 

does not have data recorded that the unit can play.
“NA DEVICE” appears.Connect a supported USB device, and check the connections.
“USB ERROR” appears.

Remove the USB device, turn the unit off, then turn it on again. If the unit still showing

 

the same display, try to connect another USB device.
“iPod ERROR” appears.

Reconnect the iPod. / Confirm that the software for the iPod is the latest version. /

 

Reset the iPod.
Noise is generated.Skip to another track or change the disc.

Tracks cannot play back as you have intended

Playback order is determined when files are recorded.
them to play.

 

“READING” keeps flashing.

Longer readout time is required. Do not use too many hierarchies and folders.

Elapsed playing time is not correct.

This is caused by how the tracks are recorded.

The number of songs contained in “SONGS”

Podcast files are not counted in this unit as this unit does not support the playback of

category of this unit is different from that

podcast files.

contained in “SONGS” category of iPod.

 

Correct characters are not displayed (e.g.

This unit can only display letters (upper case), numbers, and a limited number of

album name).symbols.
Bluetooth

Symptom

Remedy/Cause

The hands-free talk volume is low.

The hands-free talk volume can be adjusted independently. Adjust it during hands-

 

free talk. [MIC GAIN], [NR LEVEL] and [EC LEVEL] of <Bluetooth Setup> (page 21).

No beep is heard at reception of an incoming

No beep is heard depending on the type of your cell-phone. The [CALL BEEP] of

call.<Bluetooth Setup> (page 21) is set ON.
Voice is not recognized.

■ The vehicle window is open. If the surrounding noise is large, voice cannot be

 

recognized properly. Close the vehicle windows to reduce noise.

 

■ Small voice. If voice is too small, it cannot be recognized properly. Speak into the

 

microphone a little more loudly and naturally.

 

■ The person uttering the voice tag is not the one who registered the it. Only the

 

voice of the person who registered the voice tag can be recognized.

“NO NUMBER” appears.

The calling party does not notify a caller ID. / There is no phone number data.

“NO DATA” appears.

There is no outgoing call list. / There is no incoming call list. / There is no missed call

 

list. / There is no phone book list.
“NO ENTRY” appears.The cell-phone has not been registered (pairing).
“HF DISCONCT” appears.The unit cannot communicate with the cell-phone.

Continued to next page

English 35