4Input the PIN code

■Turn the volume knob to select the number.

■To move to the next digit, press ¢.

■To delete the last digit, press 4.

5Press the volume knob to transmit the PIN code.

If “PAIRING OK” is displayed, registration is completed.

When “CONFIRM PHONE” is displayed, confirm connection with a cell-phone operation.

6The receiver is connected to a cell-phone, with “HF CONNECT” displayed, and exits the easy pairing mode.

■If an error code is displayed during paring, see <Troubleshooting> (page 34).

When a cell-phone has already been registered, or maximum of five cell-phones have already been registered/ selecting a cell-phone

2“(cell-phone name)” or “DEVICE FULL” is displayed.3Turn the volume knob to select a cell- phone name.

■To register a new cell-phone, select “[DVC SEARCH]”, then go to “When registering a cell-phone for the first time.”

4Press the volume knob to set up the cell-phone.

■“✱(cell-phone name)”: The selected Bluetooth device is busy.

■“-(cell-phone name)”: The selected Bluetooth device is on standby.

■“ (cell-phone name)“: The Bluetooth device is deselected.

■If a cell-phone is already selected, deselect it, and then select a different one.

5Pressto exit easy pairing mode.Deleting the registered cell-phone

2“(cell-phone name)” or “DEVICE FULL” is displayed.

3Turn the volume knob to select a cell- phone name.

4Press and hold the volume knob to delete the selected cell-phone.“DELETE” is displayed.5Turn the volume knob to select “YES”, then press to confirm.“COMPLETED” is displayed.Registering Bluetooth Device (Pairing)Registering from Bluetooth devices

1Press SRC to turn on the power.

2Start registering this unit by operating the Bluetooth device.

By operating the Bluetooth device, register the hands-free unit (pairing). Select “KENWOOD BT CD/R-3P1”, “KCA-BT300” or “KCA-BT200” from the list of connected units.

3Input the PIN code (“0000”) in the Bluetooth device.

Check that registration is complete on the Bluetooth device. PIN code is set to “0000” as the default. You can change this code. Refer to [PIN CODE EDIT] under <Bluetooth Setup> (page 22).

4By operating the Bluetooth device, start hands-free connection.

Registering from this unit

1KDC-BT648U /KDC-X695

Press to enter Bluetooth mode. KDC-X395 /KDC-348U

Press and hold the volume knob to enter Bluetooth mode.

2Turn the volume knob to select [SETTINGS], then press to enter.

3Turn the volume knob to select [PAIRING], then press to enter.4Turn the volume knob to select [DEVICE SEARCH], then press to enter.5Press the volume knob to search for the Bluetooth device.

When search is completed, “FINISHED” is displayed.

6Turn the volume knob to select a Bluetooth device name, press to confirm.

Continued to next page

English 19