Muting upon the reception of a phone call (KDC-X395/ KDC-348U only)

To use this feature, connect the MUTE lead to your telephone using a commercial telephone accessory. (See “Installation Manual” on a separate volume.)

When a call comes in, “CALL” appears.■The audio system pauses.

■To continue listen to the audio system during a call, press SRC. “CALL” disappear and the audio system resumes.

When a call ends, “CALL” disappear.■The audio system resumes.

Listening to the Radio

■Hold for about 2 seconds to memorize the current station or the selected Program Type. (Refer to [PTY SEARCH] on the table below to select the Program Type.)

■Press briefly to recall memorized station (or Program Type after entering the PTY search mode).

1Press SRC to select “TUNER”.2Press BAND repeatedly to select a band (FM1/ FM2/ FM3/ AM).3Press 4 / ¢ to search for a station.Using the remote controller (RC-405)

#FM+ / *AM–

: Selects band.

4 / +¢

: Selects station.

1 – 6

: Selects preset station.

Adjust [SETTINGS] mode settings

While listening to the radio...

1Press the volume knob to enter [FUNCTION] mode.

2Turn the volume knob to select [SETTINGS], then press to enter.

3Turn the volume knob to make a selection, then press to confirm. See table below for selection.

4 Hold

to finish the procedure.

Item

Selectable setting (Preset: *)

SEEK MODE

Selects the tuning mode for 4 / ¢ buttons.

 

AUTO1 *: Automatically search for a station. ; AUTO2: Search in the order of the stations in the preset memory. ;

 

MANUAL: Manually search for a station.

AUTO MEMORY

YES: Automatically starts memorizing 6 stations with good reception. ; NO *: Cancels (automatic memorizing is

 

not activated). (Selectable only if [NORMAL] is selected for [PRESET TYPE].) (page 5)

TI

ON: The traffic information automatically when the traffic bulletin starts. ; OFF *: Cancels. (Not applicable if “AM”

 

is selected)
8 English