EMERGENCY CALLS
If your transceiver has been programmed with the Emergency function, you can make emergency calls.
Note: Only the AUX key can be programmed with the Emergency
function.
1Press and hold the key programmed as Emergency.
•Depending on the delay time programmed into your transceiver, the length of time you must hold the Emergency key will vary.
•When the transceiver enters Emergency mode, a tone will sound and the transceiver will change to the emergency channel and begin transmitting based on how the transceiver is set up by your dealer.
•When transmission ends, a second tone will sound. The transceiver will henceforth periodically transmit with tones sounding when it starts and stops. Transmission periods are set by your dealer.
2To exit Emergency mode, press and hold the Emergency key again.
•If the Emergency mode completes the preset number of cycles, Emergency mode will automatically end and the transceiver will return to the channel that was in use before Emergency mode was entered.
Note: Your dealer can set the transceiver to emit tones and received signals as normal or mute the speaker during Emergency operation.
26
