Kenwood TS-570D Display, w e r t y, o !0 !2 !4!5, 6 !7, @0!9 !8, Getting Acquainted

3 GETTING ACQUAINTED

DISPLAY

q	w e r t y	u i	o !0 !2 !4!5			!6 !7
				!1	!3

@0!9 !8

qMETER

While receiving, serves as an S-meter to measure and display the received signal strength. While transmitting, serves as a calibrated power meter plus an ALC meter, an SWR meter, or a Speech Processor compression meter. The Peak Hold function holds each reading for about 2.5 seconds.

w

Appears while the transceiver is in the transmit mode.

e

Appears while the squelch is open in the receive mode.

r

Appears while the internal antenna tuner {page 52} or an external antenna tuner is in-line.

t

Either “ANT 1” or “ANT 2” appears depending on whether the Antenna 1 connector or the Antenna 2 connector is selected {page 48}.

yATT

Appears when the receive attenuator is ON {page 37}.

uPRE -AMP

Appears when the receive preamplifier is ON {page 37}.

iVOX

Appears when the Voice-Operated Transmit function is ON {page 31}. For CW operation, appears when the Break-in function is ON {page 34}.

oPROC

Appears when Speech Processor is ON {page 32}.

!0NB

Appears when Noise Blanker is ON {page 36}.

!1SPLIT

Appears when the transmit frequency differs from the receive frequency {page 23}.

!2FAST

Appears when a fast time constant is selected for the Automatic Gain Control function {page 30}.

!3RIT

Appears when Receive Incremental Tuning is ON {page￿30}.

!4XIT

Appears when Transmit Incremental Tuning is ON {page 32}.

!5TX EQ.

Appears when the TX Equalizer function is ON {page￿33}.

!6

Either “N.R. 1” or “N.R. 2” appears depending on whether Noise Reduction 1 or Noise Reduction 2 is selected {page 38}.

!7

Appears when Beat Cancel is ON {page 38}.

!8MENU

Appears while Menu mode is being accessed {page￿16}.

!9M.CH

Appears while Memory Recall or Memory Scroll is being used {page 40}.

@0

Shows 2-digit information such as a menu number or a memory channel number.

11