Kenwood TS-570D Sending Messages, Changing Inter-messageInterval, Changing Volume

12 OPERATOR CONVENIENCES

■Sending Messages

1 Select SSB, FM, or AM.

•Use the same mode for transmitting and receiving.

2Press [VOX] to switch VOX ON or OFF.

•Depending on this selection, the subsequent procedures differ.

3If you switch OFF VOX in step 2, press [SEND], or press and hold Mic [PTT].

4Press [CH 1], [CH 2], or [CH 3], depending on which channel you want to use.

•For example, “AP 1– –” appears while playing back the message in channel 1.

•To interrupt playback, press [CLR].

5To play back another message in sequence, press the corresponding [CH 1], [CH 2], or [CH￿3] while playing back the first message.

•Up to three channels can be queued at the same time.

6If you press [SEND] or Mic [PTT] in step 3, press [SEND] again or release Mic [PTT].

■Changing Inter-message Interval

For repetitive message playback, you can change the interval between each series of messages. Use Menu No. 24, and select the time in the range of 0 to 60 seconds.

■Changing Volume

Turning the AF control does not change the volume for playback. To change the volume, use Menu No.￿25.

54