Kenwood TS-570D Connecting Peripheral Equipment, Computer, Compatible Transceiver

CONNECTING PERIPHERAL EQUIPMENT

COMPUTER

The COM connector allows you to directly connect a computer or dumb terminal by using an RS-232C cable terminated with a female 9-pin connector.

No external hardware interface is required between your computer and the transceiver. See “APPENDIX” on page 70 for information related to this connector.

TS-570

RS-232C serial port

Personal computer/ dumb terminal

COMPATIBLE TRANSCEIVER

COM connector

Straight cable

When transferring data to or from another TS-570 or the TS-870S, directly connect the two transceivers using the COM connectors.

When transferring data to other KENWOOD transceivers, use the optional IF-232C interface unit. Connect the IF-232C to the ACC 1 connector located on the compatible transceiver. 6-pin DIN plugs (E07-0654-XX) are available as options. Contact your dealer or a KENWOOD Service Center.

TS-570

Cross-wired cable

TS-570

COM Connector

TS-570/870S cable

TS-450S/690S/850S/950SDX

See IF-232C manual.

Cross-wired cable

DIN(6P)IF-232CRS-232C(25P)

Straight cable

ACC 1

Rear panel view on TS-450S/690S/850S/ 950SDX

DIN(6P)

ACC 1

Pin

No. Pin Name

1GND

2TXD

3RXD

4CTS

5RTS

6 NC

60