To set the internal time and date settings:
∙Select a single field (month, day, year, hour, or minute) and press Enter.
The sample window assumes that the month field was selected.
Configuration Items
Display Language Measurement System Date Format
Time Format
Set Time and Date Confirmation Tone Volume Confirmation Tones Fixed Field Delimiter Printer Messages
Load scanner from laptop Load laptop from scanner
Previous Menu
Setting
English Inch 1990/10/10 00:00
Soft
Enabled
Period (.)
DIGITAL SCIENCE Status
READY
Set Time and Date
Set Month |
| Date | ||
Set Day |
|
|
|
|
Set Year |
| 10/10/1990 | ||
Set Hour |
|
|
|
|
|
|
|
| |
|
|
|
| |
Set Minute |
|
|
| |
|
|
| Time | |
Laptop Time |
|
|
| |
|
|
| 00:04 |
|
Previous Menu |
|
|
| |
|
|
| ||
|
|
|
Enter new month below
10
To Change: Enter Value
To Retain: Press ENTER
To change the value of the time/date field selected:
∙Enter the desired value and press Enter. Valid input for each field is provided below:
Field | Valid settings | |
|
|
|
Month | 1 | – 12, representing January through December |
|
|
|
Day | 1 | – 31, representing the day of the month |
|
| |
Year | 1990 – 2089 | |
|
|
|
Hour | 0 | – 23, representing 12:00 AM through 11:00 PM |
|
|
|
Minute | 0 | – 59 |
|
|
|
NOTE: The valid settings should not vary, regardless of the time and date formats defined using the configuration items specified in the Date Format and Time Format sections. The settings entered here will, however, be displayed in the formats defined using configuration items specified in the Date Format and Time Format sections.
To leave the value of the time/date field selected unchanged:
∙Press Enter.