Kodak 7500, 5500 manual The default for all modes is Disabled, ∙Select Disable or Enable

Level transfer on T-PatchLevel transfer on T-Patch defines whether the transfer patch definition is applied to the document containing the transfer patch or the next document fed into the Scanner 5500/7500.

The default for all modes is Disabled.

The options are:

—Disabled—indicates that the next document fed into the Scanner 5500/7500 will be assigned the document level defined by the Transfer Patch Definition option.

—Enabled—indicates that the document containing the transfer patch will be assigned the document level defined by the Transfer Patch Definition option.

NOTE: If the Transfer Patch Definition option is enabled, Level 1,

Level 2, or Level 3 must be defined.

∙Select Level Transfer on T-Patchfrom the Patch Reader menu.

Mode Number: 01 Mode Name: MODE01 Item #: 10.4
		Mode Configuration					Patch Reader
Single	Index Format		Patch Reader	Off	On/Off
					Transfer Patch Definition
6006	IA Field Width		COIN2 Port Select	n/a
					Confirmation Tone
3111	Level Rules		OCR	n/a
					Level Transfer on T-Patch
Supprs	IA Display Format		Bar Code Reader	Off
FthenR	Adjoining IA		Printr Controller	Supprs	Previous Menu
None	Batching		Front Printer	Off
Off	Length Monitor		Rear Printer	Off
Off	Skew Monitor		Mode Name	MODE0
NA NA	Footswitch		Overrides	No Sav
Save & End Session			Don't Save & End Session
Save & Prev Menu			Don't Save & Prev Menu			Level X-Fer On T-Patch
							Disable
							Enable
							Previous Menu

∙Select Disable or Enable.

∙Press Enter.

A-61074 April 1997 3-41