Kodak 5500, 7500 manual Bar code location

Bar code location	Bar code location defines whether the bar codes are to be located on
	the front or rear of the document(s).
	The default for all modes is Front.
	The options are:
	— Front—the bar code reader attempts to detect bar codes on the
	front side of each document.
	— Rear—the bar code reader attempts to detect bar codes on the
	rear side of each document.

NOTE: This option is only valid when using a duplex Scanner 5500/ 7500. Also, if bar codes are located on the side opposite the side defined as the bar code location, then the bar codes will not be detected.

∙Select Bar Code Location from the Bar Code Reader menu.

Mode Number: 01 Mode Name: MODE01 Item #: 13.9
		Mode Configuration					Bar Code Reader
Single	Index Format		Patch Reader	Off	On/Off
					Bar Code Type
6006	IA Field Width		COIN2 Port Select	n/a
					Codes Per Document
3111	Level Rules		OCR	n/a
					Minimum Code Length
Supprs	IA Display Format		Bar Code Reader	Off
					Maximum Code Height
FthenR	Adjoining IA		Printr Controller	Supprs
					Scan Direction
None	Batching		Front Printer	Off
					Code Quality
Off	Length Monitor		Rear Printer	Off
					Confirmation Tone
Off	Skew Monitor		Mode Name	MODE0
					Bar Code Location
NA NA	Footswitch		Overrides	No Sav
					Previous Menu
Save & End Session			Don't Save & End Session
Save & Prev Menu			Don't Save & Prev Menu
							Bar Code Location
						Front
						Rear
						Previous Menu

∙Select the side of the document(s) on which bar codes will be placed.

∙Press Enter.

3-52 A-61074 April 1997