Kodak 7500, 5500 manual Scan direction

Scan direction	Scan direction defines whether the bar code is read in one direction;
	from left to right, or in two directions; from left to right or right to left.
	NOTE: When bar codes are read in two directions (bidirectional), the
		time required to read/decode bar codes is extended.
	The default for all modes is Unidirectional.
	The options are:
	— Unidirectional—results in bar codes being read in only one
		direction (left to right), requiring that the start character be to the
		left.
	— Bidirectional—results in bar codes being read in two directions
		(from left to right or right to left).
	∙ Select Scan Direction from the Bar Code Reader menu.
		Mode Number: 01 Mode Name: MODE01 Item #: 13.6
				Mode Configuration				Bar Code Reader
		Single	Index Format		Patch Reader	Off	On/Off
							Bar Code Type
		6006	IA Field Width		COIN2 Port Select	n/a
							Codes Per Document
		3111	Level Rules		OCR	n/a
							Minimum Code Length
		Supprs	IA Display Format		Bar Code Reader	Off
							Maximum Code Height
		FthenR	Adjoining IA		Printr Controller	Supprs
							Scan Direction
		None	Batching		Front Printer	Off
							Code Quality
		Off	Length Monitor		Rear Printer	Off
							Confirmation Tone
		Off	Skew Monitor		Mode Name	MODE0
							Bar Code Location
		NA NA	Footswitch		Overrides	No Sav
							Previous Menu
		Save & End Session			Don't Save & End Session
		Save & Prev Menu			Don't Save & Prev Menu
								Scan Direction
								Uni–Direction
								Bi–Direction
								Previous Menu

∙Select the desired scan direction.

∙Press Enter.

A-61074 April 1997 3-49