![Maximum length](/images/new-backgrounds/53322/5332295x1.webp)
Maximum length | Defines the maximum document length accepted. |
| The default for all modes is 13.000 inches / 330 mm. |
| The options are: |
—Within the range of 2.500 inches / 64 mm minimum to 20.000 inches / 508 mm maximum.
∙Select Maximum Length from the Length Monitor menu.
Mode Number: 01 Mode Name: MODE01 Item #: 7.3
|
| Mode Configuration |
|
| |
Single | Index Format | Patch Reader | Off | ||
6006 | IA Field Width | COIN2 Port Select | n/a | ||
3111 | Level Rules | OCR | n/a | ||
Supprs | IA Display Format | Bar Code Reader | Off | ||
FthenR | Adjoining IA | Printr Controller | Supprs | ||
None | Batching | Front Printer | Off | ||
Off | Length Monitor | Rear Printer | Off | ||
Off | Skew Monitor | Mode Name | MODE0 | ||
NA NA | Footswitch | Overrides | No Sav | ||
|
|
|
| ||
|
|
|
|
|
|
Save & End Session | Don't Save & End Session | ||||
Save & Prev Menu | Don't Save & Prev Menu | ||||
|
|
|
|
|
|
|
|
|
|
|
|
Length Monitor
On/Off
Minimum Length
Maximum Length
Error Response
Previous Menu
Use Arrow Keys to Set
Increase value by 0.125 inch or 1mm
Decrease value by 0.125 inch or 1mm
Increase value by 1.250 inch or 20mm Decrease value by 1.250 inch or 20mm
Enter Max. Doc. Length Range: 2.500 . . . 20.000
13.000
∙Enter the desired maximum document length using the numeric keys;
or
∙Use the arrow keys to increase or decrease the current minimum document length to the desired maximum document length:
—The left arrow key will decrease the value in 0.125 inch or 1 mm increments.
—The right arrow key will increase the value in 0.125 inch or
1mm increments.
—The down arrow key will decrease the value in 1.250 inch or
20mm increments.
—The up arrow key will increase the value in 1.250 inch or 20 mm increments.
∙Press Enter.
NOTE: A maximum document length of 17.000 inches / 432 mm or less is recommended based upon the capacity of the exit hopper.