Using the Mode Setup
Software Questionnaire
and Instructions
Logout procedure
To select the Previous Menu option:
—Use the arrow keys to position the highlight cursor over the Previous Menu option or press the Pagedown key to automatically position the highlight cursor over the Previous Menu option.
—Press Enter.
∙If a message is received which indicates that an accessory is not installed, press Enter to continue. This message indicates that the option selected requires an accessory which is not physically installed and/or properly defined to the software. In either instance, contact your Kodak service representative to properly install and/or define the accessory.
∙If a message is received which indicates that a selection is not available, press Enter to continue. This message indicates that the option selected is not available in the mode selected, or for the machine configuration.
There are two pieces of documentation designed for use with the Mode Setup Software: the Installation Instructions, which provide information on how to install, access and use the software to define the available options; and the Installation Questionnaire, which provides a convenient form on which to record all of the machine and mode definitions.
Once you have completed the installation, perform the following steps to logout of the system.
From the Machine Configuration window:
∙Select End Session to exit to DOS. or
From the Mode Configuration window:
∙Select Save & End Session if you wish to save all of the definitions and return to the Configuration Selection window.
∙Select End Session from the Configuration Selection window to exit to DOS.
