Kodak 5500, 7500 manual Error response

Error response	Error response defines the action taken when a document shorter
	than the minimum length or longer than the maximum length is fed
	into the Scanner 5500/7500.
	The default for all modes is Display and Beep.
	The options are:

—Display Error Message—results in an error message appearing on the Operator Control Panel (E106–Doc Length Monitor Warning).

—Display and Beep—results in an error message appearing on the Operator Control Panel (E106–Doc Length Monitor Warning), accompanied by an error tone.

—Stop, Display, & Beep—which results in the transport shutting down, and an error message appearing on the Operator Control Panel (E214–Re-Scan-Length Monitr Er), accompanied by an error tone.

∙Select Error Response from the Length Monitor menu.

Mode Number: 01 Mode Name: MODE01 Item #: 7.4
		Mode Configuration				Length Monitor
Single	Index Format		Patch Reader	Off	On/Off
					Minimum Length
6006	IA Field Width		COIN2 Port Select	n/a
					Maximum Length
3111	Level Rules		OCR	n/a
					Error Response
Supprs	IA Display Format		Bar Code Reader	Off
FthenR	Adjoining IA		Printr Controller	Supprs	Previous Menu
None	Batching		Front Printer	Off
Off	Length Monitor		Rear Printer	Off
Off	Skew Monitor		Mode Name	MODE0
NA NA	Footswitch		Overrides	No Sav
Save & End Session			Don't Save & End Session
Save & Prev Menu			Don't Save & Prev Menu
						Error Response
					Display Error Message
					Display and Beep
					Stop, Display, & Beep
					Previous Menu

∙Select the desired error response.

∙Press Enter.

3-28 A-61074 April 1997