The box entitled Current Print Sequence Display Items contains the current print definition for Level 1 documents. The box entitled New Print Sequence Display Items should be blank.
∙Select an item from the list of print definition options.
The item selected should appear in the New Print Sequence Display
Items box.
Repeat this step for each item you wish to include in the print definition for Level 1 documents.
NOTE: The rear printer will print a maximum of 38
∙Select Previous Menu from the list of print definition options.
Vertical start print position Vertical start print position defines how far from the leading edge of the document(s) the information printed by the rear printer will appear.
The default for all modes is 0.250 inches / 6 mm.
The options are:
—Within the range of 0.125 inches / 3 mm minimum to 20.000 inches / 508 mm maximum.
∙Select Vertical Start Print Position from the Rear Printer menu.
Mode Number: 01 Mode Name: MODE01 Item #: 16.3
|
| Mode Configuration |
|
| |
Single | Index Format | Patch Reader | Off | ||
6006 | IA Field Width | COIN2 Port Select | n/a | ||
3111 | Level Rules | OCR | n/a | ||
Supprs | IA Display Format | Bar Code Reader | Off | ||
FthenR | Adjoining IA | Printr Controller | Supprs | ||
None | Batching | Front Printer | Off | ||
Off | Length Monitor | Rear Printer | Off | ||
Off | Skew Monitor | Mode Name | MODE0 | ||
NA NA | Footswitch | Overrides | No Sav | ||
|
|
|
| ||
|
|
|
|
|
|
Save & End Session | Don't Save & End Session | ||||
Save & Prev Menu | Don't Save & Prev Menu | ||||
|
|
|
|
|
|
|
|
|
|
|
|
Rear Printer
On/Off
Print Definition
Vertical Start Print Position
Previous Menu
Use Arrow Keys to Set
Increase value by 0.125 inch or 1mm
Decrease value by 0.125 inch or 1mm
Increase value by 1.250 inch or 20mm Decrease value by 1.250 inch or 20mm
Enter Vert Start Pos Range: 0.125 . . . 20.000
0.250
∙Enter the desired distance between the leading edge of the document and where the printed information is to appear, using the numeric keys;
or
