Kohler 24RCL manual ATS Status Menu

3.14 ATS Status Menu

ATS menus appear if a Model RXT transfer switch is connected to the generator set. If no transfer switch is connected, or another model ATS is connected to the engine start connections, Remote ATS is displayed on the ATS Status screen.

The ATS Status menu displays Model RXT transfer switch and source information.

The voltage shown in these menus can be calibrated. Contact an authorized distributor or dealer for service if calibration is required.

ATS ---->

Status

	Note: If there is no Model RXT transfer
	switch connected to the generator set,
ATS Position:	Remote ATS is displayed and the other
Normal	screens on this page do not appear.

Normal Status:

Not/Acceptable

Emerg. Status:

Standby

Single-phase	Three-phase
Voltage:	Voltage L1--L2:
240V	240 V
Frequency:	Voltage L2--L3:
60.0 Hz	240 V
	Voltage L3--L1:
	240 V
	Frequency:
	60.0 Hz

Reset	Reset
Calibration	Calib? No
<---- Return	Reset
	Calib? Yes

tp6810

Figure 3-14ATS Status Menu, with Calibration

TP-6905 6/14 Section 3 RDC2 Controller Operation 39