Kohler 24RCL manual 3.18Programmable Interface Module PIM Menus

3.18Programmable Interface Module (PIM) Menus

The PIM status menu displays the status of inputs and outputs connected to the programmable interface module (PIM). This is a status display menu only. Input and output settings cannot be changed from the RDC2 controller’s user interface.

Apersonal computer running Kohlerr SiteTecht software is required to change the input and output settings. Contact an authorized distributor or dealer for service.

The Kohlerr OnCuer Plus Management System can be used to turn outputs on and off. See the OnCue Plus Software Operation Manual for instructions.

PIM	PIM 1 ---->	Input 1
Status:		In/Active

<---- Return	Input 2
	In/Active
	Output 1:
	In/Active
	Output 2:
	In/Active
	Output 3:
	In/Active
	Output 4:
	In/Active
	Output 5:
	In/Active
	Output 6:
	In/Active
	<---- Return

tp6810

Figure 3-22Programmable Interface Module (PIM) Status Menu

TP-6905 6/14 Section 3 RDC2 Controller Operation 47