3.19 Load Control Menus
The generator set may be connected to a Load Control Module (LCM) or a Model RXT transfer switch equipped with a Load Shed kit. The Load Control menu displays the status of the load control inputs and outputs, and allows a test of the load control output relays.
Generator current is displayed as a percent of the maximum generator capacity. The load control module adds and sheds loads based on the generator current.
The test function cycles the relays in the order of their priority.
For detailed information about load control operation, refer to
Load | Generator |
|
Control | Current: | 123 % |
| Load | Test Outputs |
| Control 1 | Push Select (blinking) |
| Input 1: | |
|
| |
|
| In/Active |
|
| Input 2: |
|
| In/Active |
|
| Output 1: |
|
| Add/Shed |
|
| Output 2: |
|
| Add/Shed |
|
| Output 3: |
|
| Add/Shed |
|
| Output 4: |
|
| Add/Shed |
|
| Output 5: |
|
| Add/Shed |
|
| Output 6: |
|
| Add/Shed |
|
| |
|
| tp6810 |
Figure |
48 Section 3 RDC2 Controller Operation |